Jigsaw and its benefit in cutting materials

Jigsaw is another amazing tool which gives you a great cutting experience. You can adjust the speed and orbital settings in this tool which makes your cutting job easier and convenient.

You are able to cut any material in a perfect manner as you can get around 1000- 2000 strokes in a minute which lets you finish your task quickly with perfection?

Circular Saw and its features which make it so special

A circular saw is another saw packed with power and comes with and a disc for cutting different types of materials. It involves spinning in a rotary motion for cutting.

The circular saw were invented by the end of 18 century and were widely used in America in the mid of 19 Th century.

With the help of circular saw you are able to cut various materials like wood, plastic, metal and masonry.

Masonry bits and the creation of holes by removing the material

Masonry bits are cutting tools which are used to remove material in order to create holes. These holes are made in circular cross – section.

These masonry bits come in different sizes and shapes which are able to create different variety of holes in different materials which makes them very popular for construction and drilling purposes.

These masonry bits are fixed to a drill which gives them the required power to cut through the material by rotation.

Some of the important things to keep in mind while cutting cement or concrete

You need to have at least two people including you for this job. If you are using gasoline cut-off saw you can improve the life of the blade by dripping some water on it. If you do not own a cut-off saw you can always buy or rent one from a store.?

You should wear a protective gear while using a cut-off saw. In addition you need to wear shin guards, steel –toed shoes, goggles and a hat. The dust from cement is harmful and should wear a good quality dust mask.

You should also protect your eyes and ear with goggles and cup-shaped defenders. You can wear knee pads which will increase your comfort as you kneel for cutting.?

You should avoid using water near the electric saw as it could result is mishappening.You should was all the dust from your body as soon as you are done with your job.

You can opt for abrasive blades if you have a limited budget as they come at reasonable prices as compared to diamond blades.?

Things you will need for cutting cement?

Best way to cut cement board which saves you time and energy

Cutting a cement board can be a difficult job as you will require cement board in order to install the tiles. You will also require proper tools and lots of patience to do the job in the right manner.

The size of your cement board depends on the cuts and for this you need have the right tool for your job. If you are looking to cut straight lines and your cement board is about 4 foot by a foot square a table tile saw is best for you.

On the other hand if you are looking to cut large pieces of cement board you can go for hand-held circular saw. If you want to make cut-outs and curved cuts you can choose jig saw.

The best thing is that all these tools are available at your local stores. You should make it a point to use carbon tipped blades which will cut cleanly through cement.?

This task involves the flow of dust and chalk which makes the cement board cutting job very messy. You should keep a tart below your work area which will help to catch the dust and water and let you to clean faster.

Alos if you are working inside you should seal your work area from the rest part of your house.

For making straight cuts you need to mark your cement board and you should use a straight and square edge as this will give you an idea about the marking of your line. If you are looking for circular cuts you can hammer a nail into the centre of your cut.?

Before you do the cutting you should use a bucket of water and sponge to wet the cement board. This would keep away the dust down while you are bust making the cut.In order to make a cut the table saw is the easiest method.?

Things you will need for cutting cement board

How to cut hardiebacker cement board in an easy and quick fashion

Hardiebacker board contains 90% Portland cement and ground sand. Unlike most of the board materials it has no formaldehyde, gypsum and asbestos. If you are looking to cut and work with Hardiebacker board it is easy if you use the right tools.

Although the cutting of hardiebacker cements board require circular cuts to fit around pipes, faucets and corners it is still simple if you are using the right kind of tool.

The score and snap method is one of the most popular methods for cutting hardiebacker board. If you can use a carbide tipped knife it will make your life easy for this job but you can also use a general knife.?

Simply lay the board on the ground and mark a line with a straight edge and follow this line by pressing it hard with a knife.?

If you are looking for circles, small angles and curves you should apply the score and punch method which is highly effective. You can mark the circle which is followed by scoring the circle and cross – section of the area.

Now by using a hammer you can punch the scored section of your board.?